Craftsman 315.175341 - Manual (Page 5)

SYMBOLS
Some of the following symbols may be used on this toot. Please study them and learn their meaning. Proper interpre­
tation of these symbols will allow you to operate the toot better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
"o
No Load Speed Rotational speed, at no load
Class !l Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, the user must read and under
stand the operator’s manual before using this product.
0
Eye Protection
Always wear safety goggles or safety glasses with side
shields and a full face shield when operating this product.
A Safety Alert Precautions that involve your safety.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious persona! injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.