Craftsman 315.111450 - Manual (Page 8)

OPERATION (Cont.)
lAWARNING; ALWAYS WEAR SAFETY GOG-
GLESGR SAFETY GLASSES WITH SIDE SHIELDS
WHEN OPERATING YOUR DRILL. FAILURE TO
DO SO COULD RESULT IN OBJECTS BEING
THROWN INTO YOUR EYES, RESULTING IN
POSSIBLE SERIOUS INJURY.
DRILLING
The material to be drilled should be secured in a vise
or wiith clamps to keep it from turning as the drill bit
rotates
Hold your drill firmly and place the bit at the point td
be drilled. Depress the switch trigger to start your
drill
Move the drill bit into the workpiece applying only
enough pressure to keep the bit cutting Do not force
your drill or apply side pressure to elongate a hole
Lei your drill and bit do the work See fig 3
ikWARNING:; BE PREPARED FORf BREAK?
THROUGH. DRILL BIT HAS A TENDINCYATO
GRAB AND KICK IN THE OPPOSITE DIRECTION
WHEN BREAKING THROUGH MATERIAL.
When drilling metals use a light oil on the drill bit to
keep it from overheating. The oil will prolong the life
of the bit and increase the drilling action.
tl the bit jams in workpiece or 11 the drill stalls,
release switch trigger immediately. Remove the bit
from the workpiece and determine the reason for
jamming
Page S