WARNING" Some dust created by power sanding,
sawing, grinding, drilling and other construction activi
ties contains chemicals known to cause cancer, birth
defects or other reproductive harm.

Some examples of these chemicals are:

* Lead from lead-based paints.

* Crystalline silica from bricks and cement and other

masonry products.

* Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures vary, depending on how
often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area and
work with approved safety equipment. Always wear
OSHA/NIOSH approved, properly fitting face mask
or respirator when using such tools.

WARNING; For your own safety, read all of the
instructions and precautions before operafing tool.

CAUTION: Always follow proper operating procedures
as defined in this manual — even if you are familiar
with use of this or similar tools. Remember that being
careless for even a fraction of a second can resulf in
severe personal injury.

BE PREPARED FOR JOB

• Wear proper apparel. Do not wear loose clothing,

gloves, neckties, rings, bracelets or other jewelry
which may get caught in moving parts of machine.

• Wear protective hair covering to contain long hair.

• Wear safety shoes with non-slip soles.

• Wear safety glasses complying with United States

ANSI Z87.1. Everyday glasses have only impact

resistant lenses. They are NOT safety glasses.

• Wear face mask or dust mask if operation is dusty.

• Be alert and think clearly. Never operate power tools

when tired, intoxicated or when taking medications
that cause drowsiness.

PREPARE WORK AREA FOR JOB

• Keep work area clean. Cluttered work areas invite

accidents.

• Do not use power tools in dangerous environments.

Do not use power tools in damp or wet locations.
Do not expose power tools to rain.

• Work area should be properly lighted.

• Proper electrical receptacle should be available for

tool. Three-prong plug should be plugged directly
into properly grounded, three-prong receptacle.

• Extension cords should have a grounding prong and

the three wires of the extension cord should be of
the correct gauge.

• Keep visitors at a safe distance from work area.

• Keep children out of workplace. Make workshop

childproof. Use padlocks, master switches or remove
switch keys to prevent any unintentional use of
power tools.

TOOL SHOULD BE MAINTAINED

• Always unplug tool prior to inspection.

• Consult manual for specific maintaining and adjust

ing procedures.

• Keep tool lubricated and clean for safest operation.

• Remove adjusting tools. Form habit of checking to

see that adjusting tools are removed before switch
ing machine on.

• Keep all parts in working order. Check to determine

that the guard or other parts will operate properly
and perform their intended function.

• Check for damaged parts. Check for alignmenf of

moving parts, binding, breakage, mounting and any
other condition that may affect a tool’s operation.

• A guard or other part that is damaged should

be properly repaired or replaced. Do not perform
makeshift repairs. (Use parts list provided to order
replacement parts.)

KNOW HOWTO USE TOOL

• Use right tool for job. Do not force tool or attachment

to do a job for which it was not designed.

• Disconnect tool when changing blade.

> Sears, Roebuck and Co.