Craftsman 315.115042 - Manual (Page 5)

OPERATION
WARNING: Always wear safety goggles or safety
glasses with side shields when operating your
Sander. Failure to do so could result in dust,
shavings, loose particles or foreign objects being
thrown into your eyes, causing possible serious
injury.
KNOW YOUR SANDER
See Figure 1.
Before attempting to use your sander, familiarize yourself
with all operating features and safety requirements.
Your sander is suitable for sanding with coarse, medium,
and fine grit sanding discs.
ELECTRICAL CONNECTION
Your sander has a precision built electric motor, It should
be connected to a
power supply that is 120 volts, 60Hz,
AC only (nonmal household current). Do not operate
this tool on direct current (DC). A voltage drop of more
than 10 percent will cause a loss of power and the motor
will overheat. If your tool does not operate when plugged
into an outlet, double-check the power supply.
^ WARNING: Do not allow familiarity with your
sander to make you careless. Remember that a
careless fraction of a second is sufficient to Inflict
severe injury.