Craftsman 315.115042 - Manual (Page 13)

CRAFTSMAN DISC SANDER - MODEL NUMBER 315.115042
The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your
CRAFTSMAN DISC SANDER or when ordering repair parts.
PARTS LIST
KEY PART
NO. NUMBER
1
2
3
4
5
6
7
6
9
982789-001
998174-001
998182-001
972895-003
621721-002
989592-004
622141-013
617291-001
622839-000
DESCRIPTION QUAN.
Data Plate...............................................................i
Gear Housing Cover............................................ 1
Logo Plate.............................................................1
Auxiliary Handle................................................... 1
Washer................................................................... 1
Screw (#8-10 X 2 In. Fil. Hd.)................................2
Washer................................................................... 1
Back-Up Pad.........................................................1
Back-Up Disc........................................................1
KEY
NO.
10
11
12
13
14
PART
NUMBER
617294-001
967862-000
967666-002
703776-035
972000-897
DESCRIPTION QUAN.
7 Inch Sanding Discs with 7/8 in. hole
(Item Nos. 9-25299 Fine Grit,
9-25291 Medium Grit, and
9-25292 Coarse Grit)............................................ 1
Flange Nut............................................................ 1
Optional Handle Assembly
(Includes Key Nos. 13 and 14}........................1
• Cap Screw (#3/8-24 x 1 in. Soc. Hd.)............. 2
Washer...................................................................2
Owner's Manual
NOTE "A"; Theassembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage
to the system, service should be performed by your nearest Sears Repair Center. Contact your nearest Sears Retail Store for
service center Information.
* Standard Hardware Item — May Be Purchased Locally
** Available From DIv. 98 — Source 980.00
Page 13