Craftsman 137.212290 - Manual (Page 7)

ARTON CONTTENTS
UNPACKING YOUR MITER SAW
A WARNING
To avoid injury from unexpected starting or
electrical shock, do not plug the power cord into a
source of power during unpacking and assembly.
This cord must remain unplugged whenever you are
working on the saw.
1. Remove the miter saw from the carton.
MPORTANT: Do not lift miter saw by the Trigger
Switch handle. It may cause misalignment. Only lift
machine by the base Hand Holds.
2. Place the saw on a secure stationary work surface.
3. Separate all parts from the packing materia!. Check
each one with the illustration to make certain all items
are accounted for, before discarding any packing
material.
A
WARNING
If any part is missing or damaged, do not attempt
to assemble the miter saw, or plug in the power
cord until the missing or damaged part is correctly
replaced. To avoid electric shock, use only identical
replacement parts when servicing double insulated
tools,
• To purchase replacement parts, call
1-800-469-4663.
• For missing or damaged parts upon Initial
purchase, call 1-800-843-1682.
Dust Bag
Machine
Blade Wrench Miter Table Handle