Operatio – Craftsman 315.269210 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATIO
I
HELPFUL HINTS
y
Always clamp workpiece securely before routing.
/ A safe operator is one who thinks ahead.
/ Always wear eye protection when routing.
y
Make setup adjustments carefully. Then double
check. Measure twice and cut once.
y
Keep cutters clean and properly sharpened.
y
Don’t let familiarity make you careless.
y
Study all safety rules and do the job safely.
/ Never place your hands In jeopardy.
/ Make certain clamps can’t loosen while in use.
y
Test difficult setups on scrap — Don’t waste
lumber.
y
Plan each operation before you begin.
y
Provide for smoother operation by cleaning your
router frequently. Shake router or blow with an air
jet to remove sawdust buildup.
y
Think safety by thinking ahead.
STARTING/STOPPING ROUTER
■ Grasp handles using both hands.
See Figure 9.
■
To start router:
Press the switch to the I position.
See
Figure 10.
■
To stop router:
Press the switch to the O position.
See Figure 10.
12