Wan configuration – CNet Technology CNIG904S User Manual
Page 16

CNet Technology Inc Configuration
13
WAN Configuration
To configure the WAN port:
• Select WAN from the menu.
• Select the appropriate connection type (Direct Connection or PPPoE) on the screen below,
then Click the “Configure” button.
Figure 6: WAN Screen
Tip:
If your connection documentation does not refer to PPPoE, select Direct Connection.
WAN - Direct Connection
Figure 7: WAN - Direct Connection
If you selected Direct Connection, a screen like the example above will be shown.
Data - WAN (Direct Connection)
Device ID
Device (Host)
Name
Normally, there is no need to change the default name, but if your ISP
requests that you use a particular “Hostname”, enter it here. This name
will be provided to, and recorded by, the remote DHCP Server.