Using your unit – Craftsman 358.748260 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MINIMUM WIRE GAUGE

RECOMMENDATIONS

VOLTS 25 FT.

50 FT.

100 FT.

120

A.W.G.*

A.W.GT

A.W.G*

*Amerìcan Wire Gauge

Secure the extension cord to the unit by

threading the cord through the cord re
tainer (see illustration). Insert the cord

receptacle into the recessed plug.
CAUTION: Failure to use cord retain
er could result in damage to the unit,
extension cord, or both.

USING YOUR UNIT

KNOW YOUR ELECTRIC BLOWER

READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.

vate the motor.

INLET COVER LATCH

The

INLET COVER LATCH

Is used to

open and close the inlet cover and to
secure the upper vacuum tube to the
blower unit.

BLOWER TUBE

The

BLOWER TUBE

is designed to di

rect the flow of air.

INLET RESTRICTOR

The

INLET RESTRICTOR

improves the

blower function.

the blower tube or elbow tube to the

blower unit during operation. Also,
pressing the tube release button allows
removal of the blower tube or elbow

tube.
VARIABLE SPEED CONTROL
The

VARIABLE SPEED CONTROL

is de

signed to allow an increase or de

crease in motor speed as necessary
during blower use only. To avoid caus
ing damage to the unit,

DO NOT

tempt to use the variable speed control

during vacuum use.