Craftsman 919.763500 - Manual (Page 11)

MAINTENANCE
CUSTOMER RESPONSIBIUTIES TABLE
MAINTENANCE TASK Before each use
Every 25
hours or yearly Every 50
hours or yearly Every 100
hours or yearly
PRESSURE WASHER
Check/clean inlet screen. X
Check high pressure hose. X
Check soap and chemical hose and filter X
Check gun and wand Tor leaks. X
Purge pump otairand contaminants X
Check pump oil X
Change pump oil X
ENGINE
Check oil level X
Change engine oil X
Product Specifications
Pressure Washer Specifications
Pressure 3500
Flow Rate 3.0 GPM
Cleaning Units (psi s GPM) 10,500
Engine Specifications
RPM 3600
Rated Horsepower 13
Spark Plug 0.040" 1.02mm
Gasoline Capacity 7 Gallon
Oli IOw-30 weight
General Recommendations
The warranty of the high pressure washer does not
cover items that have been subjected to operator
abuse or negligence. To receive full value from the
warranty, operator must maintain high pressure
washer as instructed in this manual.
Some adjustments will need to be made period-
ocaily to maintain your high pressure washer.
All adjustments in the Maintenance section of this
manual should be make at least once each season.
Once a year you should clean or replace the spark
plug and clean or replace the air filter and check
the gun and wand assembly for wear. A clean
spark plug and clean air filter assure proper
fuel-air mixture and help your engine run better
and last longer.
NOTE; Over time the o-rings in the gun assembly
become worn. Attach to your owners manual is a set
of replacememt o-ring and split backup ring.
11