beautypg.com

9e glis, Radio mode operations, Setting the z-enhancer – Clarion BD216 User Manual

Page 7: Switching the clock display, Setting the clock, Fm reception, Listening to the radio, Manual tuning, Seek tuning

background image

BD216

9

E
glis

Setting the Z-enhancer

This unit comes with three types of sound tone
effects stored in memory. Select the one you prefer.

*

The factory default setting is “Z-EHCR OFF”.

Each time you press Z-EHCR button

5

, the

tone effect changes in the following order.
“Z-ENHANCER 1”

“Z-ENHANCER 2”

“Z-ENHANCER 3”

“Z-EHCR OFF”

“Z-ENHANCER 1”...
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF: no sound effect

Switching the Clock Display

Press and hold the BND button

0

, and then

press the DISP button

9

to swith between the

operation mode and the clock display.

Setting the Clock

1) Press and hold the BND button

0

, and then

press the DISP button

9

to display the clock

display.

2) Press and hold the BND button

0

, and then

press the DISP button

9

for 2 seconds or

longer.

3) Press the SRCH Up button

¥

, then set the

current hour.

4) Press the SRCH Down button

¥

, then set

the current minute.

5) Press the BND button

0

, then the clock is

set.

Notes:

If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.

If you remove the vehicle’s battery for a check or
repair, the clock will be reset, so you must set it again.

Radio Mode Operations

FM Reception

For enhanced FM performance the

®

tuner includes signal actuated stereo control and
Multipath noise reduction circuits.

Listening to the Radio

1) Press the FNC button

4

to select the radio

mode, then the radio will be on.

2) To select a preset band, press the BND but-

ton

0

, then select one of the preset bands

such as FM1, FM2, FM3, FM4, or AM. Every
time the BND button

0

is pressed, the dis-

play will change as:

3) Press the SRCH Up/Down button

¥

, then

the station at which there is a broadcast will
be selected (Seek selection).

Manual Tuning

1) Press the BND button

0

, then select FM1,

FM2, FM3, FM4 or AM.

2) Press and hold the BND button

0

for 2 sec-

onds or longer, then the display will show
MANU”, which means that a manual selec-
tion function is on.

3) Press the SRCH Up/Down button

¥

and

select the right station.

Seek Tuning

1) Press the BND button

0

, then select FM1,

FM2, FM3, FM4 or AM.

2) If the “MANU” on the display is on, press and

hold the BND button

0

for 2 seconds or

longer. When the “MANU” display is off, the
Seek Selection function is on.

3) Press the SRCH Up/Down button

¥

, then

when it selects the station in which there is a
broadcast, it automatically stops.

FM1

FM2

FM3

FM4

AM