Tools you may need, Door handle removing, Removing refrigerator handle – LG LFC25765 User Manual

Page 10: Removing freezer drawer handle, Door handle installation, Reinstalling refrigerator handle, Reinstalling freezer drawer handle, Refrigerator installation, V4 in

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REFRIGERATOR INSTALLATION

TOOLS YOU MAY NEED

10 mm

V4 in

3/8 in

Hex Socket Wrench

Phillips Screwdriver Flat Head Screwdriver

1/4 in

3 / 3 2 i n

Allen Wrench

NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through a

narrow opening. If it is necessary to remove the handles follow the directions below.

NOTE: Handle appearance may vary from illustrations on this page.

DOOR HANDLE REMOVING

1. Removing Refrigerator Handle

Loosen the set screws with the 3/32 ” Allen wrench

and remove the handle.

• NOTE: If the handle mounting fasteners need to be

tightened or removed, use a 1/4 " Allen wrench.

2. Removing Freezer Drawer Handle

Loosen the set screws located on the lower side of

the handle with the Vs” Allen wrench and remove the

handle.

NOTE: If the handle mounting fasteners need to be

tightened or removed, use a I

/ 4

” Allen wrench.

DOOR HANDLE INSTALLATION

1. Reinstalling Refrigerator Handle

Place the handle on the door by aligning

handle footprints to fit mounting fasteners and

tighten the set screws with a

Allen wrench.

NOTE: If the handle mounting fasteners need to be

tightened or removed, use a 1/4 ” Allen wrench.

2. Reinstalling Freezer Drawer Handle

Place the handle on the door by aligning

handle footprints to fit mounting fasteners and

tighten the set screws on the bottom of the

handle with a

" Allen wrench.

NOTE: If the handle mounting fasteners need to be

tightened or removed, use a I

/ 4

" Allen wrench.