LG W286L - Manual (Page 3)

Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord Is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub. In a wet basement, or near a swimming pool.
Displays are provided with ventilation openings In the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result In a fire hazard. Therefore, NEVER:
■ Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
■ Place the display In a bullt-ln enclosure unless proper ventilation Is provided.
■ Cover the openings with cloth or other material.
■ Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no Impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best Image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed Images may appear on the screen. However, this Is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed Image on the screen for a long time may cause damage to the
screen and cause Image burn-ln. Make sure to use a screen saver on the product.
Burn-In and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, It may cause damage to the screen.
Make sure the panel faces forward and hold It with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
e