Casio EX-Z11 - Manual (Page 43)

43
GETTING READY
■
Battery Power Conservation Features
This camera is equipped with a sleep function and auto power
off function to conserve battery power. You can configure these
settings in the REC mode as described below.
• Sleep and Auto Power Off always operate as described below
in the PLAY mode, regardless of their current PLAY mode
settings.
– Sleep does not function in the PLAY mode.
– The Auto Power Off trigger time is always five minutes.
1. Press [MENU].
2. Use [
W] and [X] to select the “Set Up” tab.
3. Use [ S] and [T] to select the item you want to
configure (“Sleep” or “Auto Power Off”) and
then press [
X].
4. Use [ S] and [T] to select the sleep or Auto
Power Off trigger time and then press [SET].
Selecting “Off” for the sleep setting disables the sleep
feature.
NOTE
• When both sleep and Auto Power Off have the same time
settings, Auto Power Off takes priority.
• Sleep and Auto Power Off are disabled under the following
conditions.
– When there is a connection between the camera and
computer or other device
– During Voice Recording playback or recording
– During movie recording and playback
Feature
Name
Description Settings
Sleep
The monitor screen turns off (goes
into a sleep state) if no operation is
performed for a preset amount of
time. Press any button to turn the
monitor screen back on.
30 sec
1 min
2 min
Off
Auto Power
Off
Power turns off if no operation is
performed for a preset amount of
time.
1 min
2 min
5 min