Cable box connections, Cable box, Cable box and cable – Sony KV 32S40 User Manual
Page 8: Kv-32s6s, 32v65, 35s65, 35v65 only, Notes, Loiviecting jiui
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loiviecting Jiui
Cable Box Connections
Sonu’ pa\' cable TV systems use scrambled or
encoded signals that require a cable box to
\'iew all channels.
Cable box
1
Connect the coaxial connector from your
cable to tlie IN on your cable box.
2
Using a coaxial cable, connect OUT on
your cable box to VHF/UHF on your TV.
Cable box and cable
• KV-32S6S, 32V65, 35S65, 35V65 only
For this set up, you can switch between
scrambled channels (through your cable box),
and normal (CATV) channels by pressing
ANT on your remote control.
Notes
• Your Sony remote control can be
programmed to operate your cable box.
(see page 32)
• When using PIP, you cannot view the
AUX input in the window picture.
T i p
-Q-
Pressing ANT switches between these inputs.
If you will be controlling all channel selection
through your cable box, you should consider using
the CHANNEL FIX feature discussed on page 26.
Ciiblu
IN
OUT
Cubic Iw:
If you are connecting a cable box through the AUX input and would
like to switch between the AUX and normal (CATV) input you should
consider using the CHANNEL FIX feature discussed on page 26.
CabU? box
scrambled
channels
AUX
I
TO CONVERTER
-ohm coaxial
\ (signal)
cable (not suppltu'd)
VHr/UHh
CATV cable
(unscrambled channels