Sony KV 32S40 - Manual (Page 35)

I
*
Troubleshooting
Consult the table below; it suggests solutions to specific problems.
Problem What it«ould be What you can do
Cannot operate single tuner PIP
(KV-32S45,35S45)
• VCR may not be connected to your TV properly.
• VCR may not be turned on.
• The remote control may not be programmed to
operate the VCR.
• Ensure that you have set your VCR correctly, (see page 7)
• Program your remote control to operate the VCR.
(see page 30)
A red light keeps flashing on the
TV for more than a few seconds • Your TV may need service. • Call your local Sony service center.
TV makes a noise when turned
on • This is a normal function of your TV.
Screen is not lit and there is no
sound • Power cord may not be plugged in.
• Batteries may not have been placed with the correct
polarity.
• TV/VIDEO setting may be incorrect.
• Press TV/VIDEO until you receive a channel.
Poor or no picture (screen lit),
good sound • VIDEO menu settings may not be adjusted correctly.
• Antenna/cable connections may be faulty.
• VIDEO LABEL inputs may be set to WEB. (This label
darkens the screen for ideal WebTV viewing)
• Readjust your VIDEO menu settings.(see page 22)
• Check your VIDEO LABEL settings, (see page 28)
Good picture, no sound • Sound may be set to MUTING.
• Your TV may be set to SAP.
• Speaker may not be set correctly. • Press MUTE.
• Check the MTS setting in the AUDIO menu, (see page 23)
• Check your SPEAKER settings, (see page 24)
No color • Color settings may not be adjusted correctly. • Adjust the COLOR settings in the VIDEO menu,
(see page 22)
33