Sony KP-41T25 - Manual (Page 21)

4
Press + ♦ or - 4 to move the cursor (► ) to
the symbol showing the line you want to
adjust, and press RETURN.
CZB'
^CONVERGENCE
► I RED
'RED
I BLUE
'BLUE
:>MENU
#
Use ; Ê 11 Ex i iS
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON, the factory setting. If not, set
CABLE to OFF.
You do not have to do this procedure if you execute
AUTO SET UP (page 18). Do this procedure only
when you want to set it manually.
I RED : Red vertical line (left/right adjustment)
—RED ; Red horizontal line (up/down adjustment)
I BLUE : Blue vertical line (left/right adjustment)
—BLUE : Blue horizontal line (up/down adjustment)
5
Press + ■ f or - 4^ to move the line until it
converges with the center green line, and
press RETURN.
c±T]0
To move up/right, press + f.
To move down/left, press - 4.
6 Repeat steps 4 and 5 to adjust other lines
until all three lines converge and are seen
as a white cross.
7
Press MENU to return to the original screen.
I Press MENU.
2
Press + 4 or - 4 to move the cursor (► ) to
SET UP and press RETURN.
3
Press + 4 or - 4 to move the cursor (► ) to
CABLE and press RETURN.
ŒSO
CZÏ
asET UP
CHANNEL ERASE/ADD
CH CAPTION/GUIDE
VIDEO LABEL
CABLE:
ON
AUTO PROGRAM
LANGUAGE:ENGLISH
CONVERGENCE
PMENU
Use Î Ex i Î
4
Press + 4 or - 4 to select ON or OFF
and
press RETURN.
esET UP
CHANNEL ERASE/ADD
CH CAPTION/GUIDE
VIDEO LABEL
► CABLE: OFF
AUTO PROGRAM
language ;ENGL ISH
CONVERGENCE
DMENU
Use Ex i t
5
Press MENU to return to the original screen.
Note
• If CABLE appears in black, the projection TV is set to a video
input and you cannot select CABLE. Press TV on the remote
commander so that a channel number appears.
Getting Started |