You can start block play from the disc you want, To cancel block play, Note – Sony CDP-CX681 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playing CDs

Insert discs into the slot of the block you want,

referring to the table above. (See also "Inserting
Discs" on page 6.)

Press one of the BLOCK 1-8 buttons to select the

block.
The block number appears in the display.

Press O.

Block Play starts from the disc which is the most

upward number within a block and located closest
to the playing position.

You can start Block Play from the disc you want

When you want to start Block Play from the disc you
want, turn the JOG dial to select the disc, then press
ENTER.

To cancel Block Play

Press the corresponding BLOCK 1-8 button.

Note

The block number does not appear if no disc is put into the
block you specified.

1 5