Sony CDP-CX681 - Manual (Page 13)

Playing CDs
Creating Your Own Program
(Program Play)
You can arrange the order.of the tracks and / or discs to
create your own program and the program is stored
automatically. A program can contain up to 32 "steps"
— one "step" may contain a track or a whole disc.
Creating a program on the player
PROGRAM KM/»! ENTER JOG
5
To program other discs / tracks, do the following:
1
Press PROGRAM.
If a program is already stored, the last step of the
program appears in the display. When ybu want to
erase the whole program, hold down CLEAR until
"All Clr" appears in the display (see page 14),
2
Turn the JOG dial until the disc number you want
appears in the display.
To program Repeat Steps
Other discs 2 and 4
Other tracks on the same disc 3 and 4
Other tracks on other discs 2 to 4
6 Press C> to start Program Play.
To cancel Program Play
Press CONTINUE.
The program remains even after Program Play ends
When you press C>-, you can play the same program
again.
When you press PROGRAM during Continuous or
Shuffle Play
The program will be played after the current track.
The program remains until you erase them
If you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that are not found in the player or on the disc
are deleted from the program, and the rest of the
program is played in the programmed order.
DISC TRACK
R L
r-
Disc number
To program a whole disc, skip this step. Press
IK1W until the track number you want
appears in the display.
RO
Track number
4-
Press ENTER or PROGRAM.
' The track being programmed
The disc being
programmed Playing order
1 3