Sony TC-WE825S - Manual (Page 15)

ecoramg operations
Recording the Same Source on
Both Decks (Simultaneous
Recording)
You can record the same source on cassettes in deck A
and B at the same time.
DIRECTION MODE < 1 / O A+B REC < 3 / 0
PAUSE II
1 Insert blank cassettes into both decks.
Make sure that record-protect tabs on the
cassettes have not been removed.
2
Select the Dolby NR system (see page 7).
3 Select the side(s) to be recorded on.
To record on Set DIRECTION MODE to
Only one side
Both sides •^crp -
4 Press A+B REC.
Both decks change to recording pause.
5 ■ Start playing the program source.
6
Adjust the recording level manually, if necessary
(see page 7).
7 Select the side you want to start recording from
on both decks.
To record from Press
The front side o
The reverse side <1
8 Press PAUSE I I on deck B.
Simultaneous Recording starts.
To stop Simultaneous Recording
Press ■ on both decks.
PAUSE I I and REC MUTING O (see page 16) on deck
B can control both decks at the same time
During Simultaneous Recording, PAUSE II and REC
MUTING O on deck B control both decks, but not
PAUSE
I I and REC MUTING O on deck A.
Recording Your Own Program
(RMS Dubbing)
You can record an RMS program that you've created
(see "Creating Your Own Program (RMS Play)" on
page 9). This function works only at normal speed.
RMS/START O/O HIGH/NORMAL
ED
r«nmm oD ®
IS
PAUSE II
1 Insert the recorded cassette into deck A and a
blank cassette into deck B.
Make sure the record-protect tabs on the cassette
in deck B have not been removed.
2 Program tracks on deck A (see Steps 1 to 5 on
page 9).
3 Press HIGH/NORMAL once to change the tape
deck to dubbing standby.
4 Select the side of the tape in deck B you want to
record on.
To start recording Press
On the front side
On the reverse side
5 Press RMS/START or PAUSE I I on deck B to
start RMS Dubbing.
To Stop RMS Dubbing
Press ■ on deck B. The RMS program remains even after
RMS Dubbing stops.
To insert a blank space on the tape before you start
RMS Dubbing
You can insert a blank space of 4 seconds or more on
the tape in deck B by pressing REC MUTING O after
Step 4.
For details, see "Inserting a Blank Space During
Recording (Record Muting)" on page 16.
A blank of 10 seconds is automatically inserted on
the tape when you start RMS Dubbing if:
— you insert a new cassette into deck B.
— the tape in deck B is completely rewound to its
beginning and automatically stopped.
15