Connecting an antenna/cable tv system with a vcr, To an s video equipped vcr without a cable box – Sony KV-32S15 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an antenna/cable TV system with a VCR
To connect your VCR to the TV, first check the model
number of your TV and select the corresponding
connection. For details on connection, see the
instruction manual of your VCR. In order to operate
PIP, a VCR must be connected to your TV. Before
making connection, disconnect the AC power cords of
the equipment to be connected.
After making these connections, you will be able to do
the following:
• View fhe playback of video tapes
• Record one TV program while viewing another
program
• Watch two TV programs at once using a window
picture (picture-in-picture)
(Rear of TV)
Note
• To connect a monaural VCR, connect the audio output of the
VCR to AUDIO-L (mono) of VIDEO 1 IN on the
T\'.
To an S video equipped VCR without a cable box
If your VCR has an S video output jack, hook up as
follows and then set S VIDEO to ON on } our TV
(page12). It is set to ON at the factory.
(Rear of TV)
RK-74A
(not supplied)
Getting Started