Setting the color temj^rature, Data 40'fact6ry-bres^ :le^els, Data 40 'fact 6 ry-bres^ :le^els – Sony CPD-100SF User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Color Temj^rature'
The selected color temperature becomes the common setting
for all input signals.
1
Press COLOR button.
The "COLOR TEMPERATURE" OSD appears.
COLOR
6
COLOR TEMPERATURE
VARIABLE
1*1 ir^ ~'"1 5000K 9300K
SI 50 ® B a
2
Adjust with the
l
CÌ-
and 3 buttons.
To select 5000K or 9300K
Press O'
buttons.
The selected color temperature is indicated in yeUow.
& CS~) O C2D
•^ ... to select 5000K
■ ^ ... to select 9300K
To obtain the desired color temperature between
5000K and 9300K
Press 3 buttons.
O
OD
♦ ... for higher temperature
-^ ... for lower temperature
Your most recent adjusted color temperature will be
recalled by pressing
3
♦ / ^ button.
To erase the "COLOR TEMPERATURE" OSD, press the
COLOR button again.
The "COLOR TEMPERATURE" OSD automatically
disappears 20 seconds after you release the buttons.
Data 40'Fact6ry-Bres^ :Le^els'
To reset an adjustment item_____________________________
Press the button of the adjustment item you want to reset,
and then press the RESET button before the OSD (On
Screen Display) disappears.
To reset all adjustment data at once (for
the received signal)_____________________________________
Press the RESET button when no OSD is shown.
RESET
To
reset
all
adjustment
data
to
factory-
preset levels___________________________________________
Press and hold the RESET button for more than 2 seconds.
All adjustment data are reset to factory-preset levels.
RESET
To reset, press the RESET button while the OSD is on.