Sony CPD-100SF - Manual (Page 4)

Getting Started Using Your Monitor
Before using this monitor, please make sure that the
following items are included in your package: Multiscan
lOOsf monitor (1), power cord (1), MacView adapter (1),
warranty card (1) and this operating instruction manual (1).
This monitor will sync with any IBM or compatible system
equipped with VGA or greater graphics capability.
Although this monitor will sync to other platforms miming
at horizontal frequencies between 30 and 70 kHz, including
Macintosh and Power Macintosh system, a cable adaptor is
required. Please consult your dealer for advice on which
adaptor is suitable for your needs.
Step 1 : With the computer switched off, attach the video
signal cable to the video output.
IBM or compatible computer
to video output
Apple computer
OOP <
U B
MacView adapter
(suppiied)
'0= ^
to video output
Notes:
• Use a HD15 (Female)-HD15 (Male without the No.9 pin)
adapter (not supplied) for any current DOS computer
which is not conpatible with DDC 2AB and its No.9 pin is
disconnected.
• Supplied Macintosh adapter is compatible with
Macintosh LC, Performa, Quadra and Power Macintosh
series computers. Macintosh II series and some older
version of PowerBook models may need an adapter with
micro switches.
Step 2: With the monitor switched off, attacTi the power
cord to the monitor and the other end to a power
outlet.
Preset and User Modes
The Multiscan lOOsf has factory preset modes for the 7 most
popular industry standards for tme "plug and play”
capability.
For less common modes, the Multiscan lOOsf's Digital
Multiscan Technology will perform all of the complex
adjustments necessary to ensure a high quality picture for
any timing between 30 and 70 kHz.
No. Resolution
(dots X Hnes)
Horizontal
Frequency Vertical
Frequency
Graphics
Mode
1 640 X 480 31.5 kHz 60 Hz VGA Graphic ’’
2 800 X 600 46.9 kHz 75 Hz VESA
3 800 X 600 53.7 kHz 85 Hz VESA
4 832 X 624 49.7 kHz 75 Hz Macintosh
16" Color
5 1024 X 768 60.0 kHz 75 Hz VESA 2)
6 1024 X 768 68.7 kHz 85 Hz VESA
7 1280 X 1024 64.0kHz 60 Hz VESA
For the customers using the Windows* 95*’
Even if you select SONY for the maker on the device select
screen, the model name (CPD-IOOSF) may not appear.
In this case, select the DDC standard monitor.
Recommended horizontal timing conditions
Horizontal sync width should be: >1.0 psec.
Horizontal blanking width should be: >3.6 psec.
1) VGA is a trademark of IBM Corporation.
2) VESA is a trademark of the non-profit organization.
Video Electronics Standard Association.
3) Macintosh is a trademark of Apple Computer Inc.
4) Windows® is a registered trademark of Microsoft
Corporation in the United States and other countries.
Step 4: If necessary, adjust the user controls according
to your personal preference.
The installation of your Multiscan lOOsf is complete. Enjoy
your monitor.