Getting started, Charging the battery pack, Charging time – Sony CCD-TR54 User Manual
Page 7: Charging and installing the battery pack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Charging and Installing the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the battery
pack, use the supplied AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(1) Connect the AC power adaptor to the w'all outlet.
(2) Align the right side of the battery pack with the line on the AC pow'er adaptor, then slide the battery
pack in the direction of the arrow.
(3) Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the mains, and then
remove the battery pack and install it on the camcorder.
S
o
Charging Time
Battery pack
NP-33
(supplied)
NP-98/98D
NP-SO/80D
NP-68/66H
NP-C65
NP-60D
Charging
time*
60
215
190
125
105
90
* Approximate minutes to charge an empty p^ck usijig the supplied AC power adaptor (Lower
temperatures require a longer charging time.)