Troubleshooting – Sony KV-32V26 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/631000/31/background.png)
W
Troubleshooting
Troubleshooting
Cannot Operate Single-Tuner PIP
(KV-27S26,
27V26, 29RS26, 29RS26C, 29V66M, 32S26, 32TW26,
34RS26C, 35S26, 37RS26 only)
• Check that cable is connected to the VCR,
and the VCR is turned on.
• Check that the VCR is connected to the TV.
No picture (screen not lit), no sound
• Make sure the power cord is plugged in.
• Operate with the buttons on the TV and the
remote control.
• Insert the batteries in the remote control
with the correct polarity.
• Replace theiDatteries with new ones if they
are weak.
• Check to see if the TV/VIDEO setting is
correct: when watching TV, set to TV, and
when watching video tapes, set to VIDE01,
2, or3.
• Try another channel. It could be station
trouble.
• Perform AUTO SET UP again using the
SET UP button to return to the factory
preset condition, (page 13)
Poor or no picture (screen lit), good sound
• Adjust PICTURE in the VIDEO menu,
(page 19)
• Adjust BRIGHTNESS in the VIDEO menu,
(page 19)
• Check antenna/cable connections.
• Perform AUTO SET UP again using the
SET UP button to return to the factory
preset condition, (page 13)
• Remove objects from the front of TV.
• Check the LIGHTSENSOR setting in the
VIDEO menu, (page 19)
Good picture, no sound
• Press MUTING so that “MUTING”
disappears from the screen, (page 14)
• Check the MTS setting in the AUDIO
menu, (page 20)
• Make sure SPEAKER is set to ON in the
AUDIO menu, (page 20)
• Perform AUTO SET UP again using the
SET UP button to return to the factory
preset condition, (page 13)
No color
• Adjust the COLOR in the VIDEO menu,
(page 19)
• Black and white programs cannot be seen
in color.
• Perform AUTO SET UP again using the
SET UP button to return to the factory
preset condition, (page 13)
Only snow and noise appear on the screen
• Check the CABLE setting in the SET UP
menu, (page 22)
• Check the antenna/cable connections.
• Make sure the channel is broadcasting
programs.
• Press ANT to change the input mode.
(page 15)
Dotted lines or stripes
• Adjust the antenna.
• Move the TV away from noise sources
such as cars, neon signs, or hair-dryers.
Double images or ghosts
• Use a highly directional outdoor antenna or
a cable (when the problem is caused by
reflections from nearby mountains or tall
buildings).
Cannot operate menu
• If the item you want to choose appears in
gray, you cannot select it. Press TV/
VIDEO correctly.
27