Sony CPD-120VS - Manual (Page 27)

Power Saving Function
This display meets the power saving guidelines set by the International
ENERGY S tar Program. It is capable of reduced power consumption
when used with a computer equipped with Display Power Management
Signaling (DPMS). By sensing the absence of the sync signal coming
from the computer, it will reduce the power consumption as follows:
•/ CAUTION
The Power Saving function will automatically put the display into Active-off state if the
power switch is turned on without any video signal input. Once the horizontal and vertical
syncs are sensed, the display will automatically return to its Normal operation state.
State Power
consumption Required
resumption time (!) Power
indicator Speaker
1 Normal
operation
2 Suspend (1st step
of power saving)
3 Active-off (2nd
step of power
saving)
4 Power-off
CPD-120VS
130 W (max)
CPD-220VS
150 W (max)
15 W (max)
10 W (max)
Approx. 3 sec.
Approx. 10 sec.
Approx. 10 —
Green
Green
Green +—*•
Orange
Orange
Off
a-i
On
Off
Off
Off
Note
1)' To Tower the power consumption to 0 W, disconnect the power cord.
Power Saving Function 27