Available features, Brightness, To exit the osd – Sony CPD-120VS User Manual

Page 25: Notes on gpe mode, Selecting graphic picture enhancement (gpe)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Available Features

Selecting Graphic Picture Enhancement

(GPE)

There are 4 GPE modes from "0" through "3," and the picture is more
vivid at a higher number. You can enjoy movies and games with striking
visuals by enhancing the picture sharpness.

Default setting is "0."

1. Press the ® button.

The BRIGHTNESS/GPE OSD appears.

BRIGHTNESS

GPE

l O - 1 - 2 - 3

2. Press the ^ +/- buttons to select the GPE mode.

+ for higher number

- for lower number

♦

3 4

You can adjust the brightness on the same OSD by pressing the

^ +/- buttons.

To exit the OSD

Press the ® button again.

Tip

If you don't touch any buttons, the OSD automatically disappears after 10 seconds.

When you want to adjust another item, press the button of the item. The OSD of the selected

item appears.

Notes on GPE mode

For text oriented applications such as word processing and spreadsheets, set the GPE
mode to "0" (default setting).
GPE (Graphic Picture Enhancement) mode is reset to "0" when:

• you turn off the display
• the PC recovered from the power saving mode
• the resolution is changed

Available Features