Sony CDP-C265 - Manual (Page 8)

8
Playing CDs
Locating a Specific Disc
You can locate any disc before or while pla)dng a disc.
D I S C I - 5 DISC CHECK t> DISC SKIP
To locate Press
The next disc DISC SKIP while playing a disc
A specific disc directly DISC 1 - 5
A disc while checking the
labels DISC CHECK while the disc
tray is open. The disc tray turns
to show you each disc label.
When the disc you want comes
in front of you, press t> to
start playing.
A disc by scanning the first
track of each disc for 10
seconds DISC CHECK before you start
playing while the disc tray is
closed. When you find the disc
you want, press O to start
playing.
'Q' You can extend the playing time during scanning the
discs
Press DISC CHECK repeatedly until the playing time
you want (10,20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Notes
• When you press DISC CHECK, the play mode
automatically changes to ALL DISCS continuous play
mode.
• When you've opened the disc tray by pressing
EX-CHANGE, you cannot use the DISC CHECK function.
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the D«/>I>II (AMS: Automatic Music Sensor)
buttons or number buttons. You can also locate a
specific point in a track while playing a disc.
r
>
10
-
o o o
ь ‘ ь " ь
O O O
O O O
0 n o
CD □ □
□ □ □
■BH H
ir^
Number buttons
M.SCAN
To locate Press
The next or
succeeding tracks C>t>ll repeatedly until you find the
track
The current or
preceding tracks KM repeatedly until you find the
track
A specific track
directly Number button of the track
A track by scanning
each track for 10
seconds (music
scan) Y] M.SCAN before you start playing.
When you find the track you want,
press ► to start playing.
A point while
monitoring the sound ►► (forward) or (backward) and
hold down until you find the point
A point quickly by
observing the display
during pause •«/►► and hold down until you
find the point. You will not hear the
sound during the operation.
When you directly locate a track numbered over 10
Press >10 first, then the corresponding number buttons.
To enter "0," use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
'Q' You can extend the playing time during music scan [Y]
Press M.SCAN repeatedly until the playing time you
want (10,20 or 30) appears in the display. Each time you
press the button, the playing time changes cyclically.
Note
If " / / " appears in the display, the disc has reached the end
while you were pressing Press or KM to go back.