Sony 3-755-967-11(1) - Manual (Page 16)

Manual Tuning
METER BAND/riME ZONE
1
2
3
4
Set the POWER/LOCK switch to POWER.
Press the ON/OFF button to turn the radio on.
Turn the VOL control a little to get sound.
Press the BAND button to select the band.
Each press of the button changes the band in the following
order.
MW^SW—FM-
in; □
6
(The display window shows the last frequency chosen in each
band.)
For SW. while pressing the METER BAND/TIME ZONE button,
press the TUNE -i- or - button to select the meter band.
Tune in the desired station by pressing the TUNE -i- or -
button.
If you keep the button pressed, frequencies change
continuously.
For the channel step, see the table on page 35.
Adjust the volume.
To turn the radio off
Press the ON/OFF button.
30
On TONE selector
When you listen to the news, set the TONE selector to NEWS.
Human voice will be heard more clearly. When you listen to music
set it to MUSIC.
To enjoy FM stereo
Connect the stereo earphones to the PHONES jack.
To Improve Reception
MW: Since the reception is affected by the
position of the radio, rotate the unit
horizontally for optimum reception.
SW: Pull out the telescopic antenna to its
full length and set it vertically. Usually
the telescopic antenna is sufficient for
SW reception. However, in a metal or
concrete building, use the wire
antenna supplied.
FM: Extend the telescopic antenna and
adjust the length, direction and angle
for the best reception.