1 press tuner, 2 select am, 3 press + or-tuning – Sony 3-753-022-22(1) User Manual
Page 4: 4 adjust the volume, 3 press memory, Tuning in a preset station, Method a: direct, 3 press the preset numeric button, Method b; scan, 2 press + or-preset
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Manual Tuning (for AM reception)
POWER ON
tool I
1
2 3
4
□
aE-jg
Select SPEAKERS
A or B.
1
Press TUNER.
2
Select AM.
3
Press + or-TUNING.
Each time + or - is pressed, the frequency will
change by 10 kHz. To change the frequency
continuously, keep the button pressed.
4
Adjust the volume.
Quickly tuning in a roughly known frequency
Proceed as the following example.
Example: The station between AM 700 and AM 800 kHz.
AM DIRECT
cn-
'W'
kHz
4
kHz
4
no'r)'.
kHz
4
n o n
l O U
kHz
Preset Tuning
A total of 30 FM/AM stations can be memorized in any
desired sequence.
Select SPEAKERS A or B.
1
Tune in the desired station.
(See "Automatic
Tuning", "Manual Tuning" or "Direct Access Tuning".)
2
Press SHIFT to select the memory page (A, B or
C).
3
Press MEMORY.
Memory indicator appears for a few seconds.
4
Press the desired numeric button (1 to 0), while
the MEMORY indicator is displayed.
Repeat above steps for presetting other desired stations.
Use of memory pages
The memory pages (A, B and C) can be used to classify stations
according to the music category, station band, etc.
Replacing a preset station
Preset another station on the number of the station to be replaced.
The previously preset station will be erased.
Tuning in a Preset Station
Method A: Direct
1
Press TUNER.
2
Press SHIFT to select memory page (A, B or C).
3
Press the preset numeric button.
4
Adjust the volume.
Method B; Scan
1
Press TUNER.
2
Press + or-PRESET.
Each time you press + or -, the preset station of the next
higher or lower number is tuned in.
A1 T AO
M
-----------
» S"'
+
+
^ +
---------------- ► CO ^ ^
Cl
~ BO
• If you keep pressing + or -, preset stations are
successively tuned in. Release the button when the
desired preset .station ic