Specifications, Audio power specifications, Power output and total harmonic distortion – Sony 3-753-022-22(1) User Manual
Page 12: Other specifications, Amplifier section, General
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/630876/12/background.png)
Specifications
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 8-ohm load, both channels driven, from 40 - 20
kHz, rated 40 watts per channei minimum RMS power,
with less than 0.8% total harmonic distortion from 250
milliwatts to rated output.
Tuner section
Other Specifications
Amplifier section
Continuous RMS power output (8 ohms, at 1 kHz less than
0.8% total harmonic distortion)
50 W + 50 W
Dynamic power (at 1 kHz IHF)
55 W + 55 W (8 ohms)
60 W + 60 W{4 ohms)
Harmonic distortion
Less than 0.8% at rated output
Frequency response
PHONO: RIAA equalization curve ±0.5 dB
CD
VIDEO
TAPE
10 Hz ■ 50 kHz " ° dB
Inputs
Sensitivity
Impedance
S/N (weighting
network, input level)
PHONO
2.5 mV
50 kilohms
74 dB
72 dB* (A, 2.5 mV)
CD
VIDEO
TAPE
150 mV
50 kilohms
95 dB
80 dB* (A. 150 mV)
78 IHF
Outputs
REC OUT, VIDEO
(AUDIO) OUT
Voltage 150 mV
Impedance 10 kilohms
SPEAKER A, B
Accepts speakers of
8-16 ohms
HEADPHONES
Accepts low and high
impedance headphones
Tone controls
BASS; ±10 dB at 100 Hz
TREBLE; ±10 dB at 10 kHz
Muting
-20 dB
DBFB
+ 12 dB at 70 Hz
FM tuner section
AM tuner section
Tuning range 87.5 — 108 MHz
530 — 1710 kHz
Antenna
terminals
300 ohms,balanced
75 ohms, unbalanced
External antenna
terminal
Sensitivity at
50 dB
quieting
18.3 dBf, 4.5 (iV
(mono)
38.3 dBf, 45 H.V
(stereo)
—
Usable
sensitivity
11.2 dBf, 2 nV (IHF)
Loop antenna:
500 trV (at 1,000 kHz)
Signal-to-
noise ratio
76 dB (mono)
70 dB (stereo)
54 dB (at 50 mV/m)
Harmonic
distortion
0.3% (mono), 0.5%
(stereo) at 1 kHz
0.5% (at 50 mV/m,
400 Hz)
Selectivity
60 dB at 400 kHz
40dBat 10 kHz
Separation
45 dB at 1 kHz
—
Frequency
response
30 Hz —15 kHz
dB
—
General
System
Tuner section: PLL quartz-locked digital
synthesizer system
Preamplifier section; low-noise NF type equalizer amp
Power amplifier section: quasi-complementary SEPP
Power requirements
120 V A C , 60 Hz
Power consumption
90 W
In standby condition: 5 W
AC outlets
One switched (120 W/1A Max.)
Dimensions
Approx. 430
X
122.5 x 300 mm (w/h/d)
(17 X 4 7g X 11 Vg inches)
including projecting parts and controls
Weight
Approx. 6.5 kg (14 lb 5 oz)
Accessories supplied
FM wire antenna (1)
AM loop antenna (1)
Remote Commander RM-S103 (1)
Sony batteries SUM 3(NS) (2)
Design and specifications subject to change without notice.