Section 5 disassembly, Important note – Sony CMD-CD18 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5
DISASSEMBLY
IMPORTANT NOTE :
The
IMEI
Sticker
mounted
on
the
main
board
(visible
from
the
battery
compartment)
should
not
be
removed
at
all.
The IMEI number is the electronic identification of the hardware, and it is stored electronically.
There should be no discrepancy between the number on the sticker and the number within the set logic allowed.
Remove
the
battery
and
the
4
screws
in
the
battery
compartment.
Note
that
the
SIM
card
is
also
located in this area
Insert
the
hook
release
jig
(p/n
3-043-180-01)
in
the
gap
between
upper
and
lower
case.
Then
gently
slide
the
jig
in
the direction of the white arrow. This is to release the claws
between
the
upper
and
lower
case
(as
indicated
by
the
black arrows).
Important: Do not insert the hook release jig too deep
into the gap, that might resuit in damaging the PWB
while sliding the jig.
*1«-' iT'
The front cosmetic and back cosmetic can now be
separated, and the main board can be taken out.
14