ClearSounds CS-CLA7BT - Manual (Page 6)

6 – ENGLISH 7 – ENGLISH
IMPORTANT FACTS ON
CHARGING THE CLA7BT
FIRST TIME USE:
Before using your CLA7BT for the first time, you
need to charge its self-contained LI-Ion battery
for 24 hours.
RECHARGING:
When you hear 5 rapid beeps through your
hearing aid or repeated at 20 second intervals
and the LED indicator turns red you will need to
recharge the battery.
After the battery is fully charged, the LED
indicator will turn off. It takes approximately 1
to 1.5 hours to fully charge the battery. Do not
charge for more than 24 hours.
Over extended periods of time, the battery
will gradually wear down and require longer
charging times. This is normal. The more you
talk on the phone using your CLA7BT the less
standby time your battery has.
HOW TO CHARGE:
1 Using AC Power Supply - Connect the
3.5mm end of the USB cable into the
charging port of the CLA7BT, and then
connect the other end into the USB jack
of the base charger. Plug the base charger
CLA7BT-EN,SP,FR.indd 6 9/9/08 10:45:01 AM