ClearSounds CS-CLA7BT - Manual (Page 13)

12 – ENGLISH 13 – ENGLISH
release the Multi-Function button to confirm
the requested action.
Device Status Action
Function Phone CLA7BT Hands Free Profile
Power ON -- oFF Press and Hold
the Multi-Function
Button until the
Neckloop is powered
ON. A set a 4 tones
plays (low to high)
and LED flashes 2
times (0.1 Sec on,
0.5 Sec off)
Pairing/
Bonding
-- oFF Press and Extend
Hold the Multi-
Function Button
until the LED is
steadily ON. The
neckloop can then
be discovered by
another Bluetooth
Device for 2 minutes.
Power OFF -- ON (idle) Press and Extend
Hold the Multi-
Function Button
until the neckloop
is powered OFF. A
set of 4 tones plays
(high to low) and the
LED is off.
Make a
Voice Dial
Call
ON and the
phone must
support
voice dialing
from hands
free device
ON (idle) Press and Release
the Multi-function,
speak the name of
the number you want
dialed, the phone
will dial the number.
CLA7BT-EN,SP,FR.indd 13 9/9/08 10:45:02 AM