Char-Broil 10201595 - Manual (Page 9)

3
4
Axle
Wheel
Hitch Pin
Firebox Lid
Firebox Bottom
Figure A
Figure B
Axle Hitch Pin
Hitch Pin
Wheel
Legs with
holes
• Slide axle into holes at ends of legs (legs
without end caps).
• Attach wheels onto axle rod using hitch
pins. Hitch pins insert through hole in axle
as shown in box A.
Check to be sure that all screws and nuts
used so far are fully tightened.
•
• Place the firebox onto the smoker chamber and
align the large openings.
• Insert eight #10-24 X 1/2” screws through the
smoker chamber, into the firebox. Secure with
eight #10-24 flange nuts as shown in figure B.
Fully tighten all screws and nuts.
Pre-assemble the Firebox Lid and the Firebox
Bottom using eight #6-32 X 3/8 Screws as
shown in figure A.
Eight
#6-32 X 3/8
Screws
Firebox
Eight
#10-24 X 1/2
Screws
Page 9
Eight
#10-24
Flange
Nut Smoker
Chamber