Sony STR-AV910 - Manual (Page 13)

dl PROGRAM CLEAR button
m POWER button
Turns on/off the receiver.
d] ÖECK and VTR selectors
DECK A, B; Selects deck A or B.
VTR 1,2,3: Selects VCR 1,2 or 3.
1: BetamaxVCRs
2:8 mm VCRs
3:VHSVCRs
[U PHONO buttons
START: Starts record play.
STOR Stops record play.
[D TV operation buttons
TVA/IDEO: Selects the Input signal to the TV set, either a
TV signal or VCR programs.
VOL (volume) +/- buttons
CH (channel)
+!- buttons
m FUNCTION selectors
Note
DIGITAL button does not function for STR-AV1010.
m SURROUND buttons
ON/OFF: Turns on/off the surround mode.
MODE: Selects the surround mode.
m DBFB/DDS ON/OFF switch
Turns on/off DBFB (Dynamic Bass Feed Back)
[|] VOL (volume) control buttons
H MUTING button
Ql] TUNER operation buttons
INDEX: Preset station index select |buttons
+/-: Selects a next/previous preset station under
the same index.
SELECT: Index select button
PRESET: Preset station select buttons
+/-: Selects a higher/lower preset channel
number.
EQ LINK: Turns on/off the equalizer link.
QH LEARN indicator
Qll Mode selector
SONY STD: To operate the commander on Sony standard.
USER STD: To use the learned functions.
LEARN: To perform learning function.
IE TV and VTR POWER buttons
TV: Turns on/off the TV.
VTR: Turns on/off the VCR.
QH CD player operation buttons
Starts play.
■: Stops play.
AMS (Automatic Music Sensor)
PGM: Program play
SHUFFLE: Shuffle play
CONTINUE: Continuous play
DISC SKIR Disc skip
QH TAPE deck operation buttons
Reverse fast winding
Reverse play
Forward play
Fonward fast winding
■: Stop
II:
Pause
•: Recording (While you press #, press REV for reverse
recording or FWD for forward recording.)
IE VTR operation buttons
Rewind
►: Play
Fast forward
■: Stop
II:
Pause
•: Recording buttons (Press both buttons for recording.)
ANT TV/VTR: Selects the output signal from the antenna
terminal from the VCR, either TV or VCR.
CH +/-: Channel select buttons
mi EQUALIZER operation buttons
ON/OFF: Turns on/off the equalizer.
MODE Selects the equalizer mode (A through F).
BAND: Selects the equalizer band.
(This button does not function for STR-AV101Q.
01] CURSOR MODE operation buttons
H RESET button
Notes
•When the CONTROL S OUT connector is connected to the
CONTROL S IN connector of each equipment, you can
control the connected equipment using this remote
commander.
13