Required cords, Digital component hookups – Sony STR-DA50ES User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Digital Component Hookups

^ Connect the digital output jacks of yc'ur DVD player and

DBS tuner (etc.) to the receir er's digital input jacks to

bring the multi channel surround sound of a movie

theater into your home. To enjoy full effecf of multi

channel surround sound, five speakers (fwo front

speakers, two rear speakers, and a center speaker) and a

subwoofer are required. You can also connect an LD

player with an’IiF OUT jack via an RF demodulator, like

the Sony MOD-RFl (not supplied).

TV or DBS tuner

(TV tuner or LO player)

Required cords

Optical digital cords (not supplied)

Black ■dii~lB!!!i

amte Black

Coaxial digital cord (not supplied)

Yellow c^i III)]—

=01111 Ik» Yellow

Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.

Yellow (video)

White (L/audio)^^^^^

White (L/audio)

Red (R/audio)

If your DVD player is equipped with a COAXIAL OUTPUT, do not

make optical connections. Only connect the DVD player to the

receiver's DVD IN COAXIAL jack.

Example of LD player connected via an RF demodulator

Please note that you carmot connect an LD player's AC-3 RF OUT jack directly to this unit's digital input jacks. You must
first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RF demodulator, then
connect the RF demodulator's optical or coaxial digital output to this unit's OPTICAL DVD/LD (TV/LD) IN or COAXIAL
DVD/LD IN jack (USA/Canada only). Refer to the instruction manual supplied with your RF Demodulator for details on

AC-3 RF hookups.

Note

When making connections as shown above, be sure to set INPUT MODE (
INPUT MODE is set to "AUTO."

] on page 23) manually. This unit may not operate correctly if