Compaq PowerLeap PL-P3/SMP User Manual
Page 3
www.powerleap.com
•
www.friendtech.com
-3-
Installation Guide
The heatsink with protective membrane. Peeling off the protective membrane.
Installing the heatsink/fan onto the
processor.
Attaching the heatsink/fan's retaining
clip to the ZIF socket. (1)
Attaching the heatsink/fan's retaining
clip to the ZIF socket. (2)
Connecting the fan's power cable to the
PL-P3/SMP.
Installing the PL-P3/SMP™ and connecting to a power supply
For most systems, you can connect the provided power cable directly from the PL-P3/SMP to an unused 4-pin
connector from the power supply.
Connecting the PL-P3/SMP™ power cable to an unused connector from the power supply:
After removing the original CPUs.
Connecting the 3-pin end of the
PL-P3/SMP’s power cable to the PW1
connector on the PL-P3/SMP.
Inserting the first PL-P3/SMP into the
processor slot.