Selecting a sound field, Sound field buttons, 1 press mode – Sony STR-DE635 User Manual
Page 28: To turn the sound field off
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting a Sound Field
SUR Jog dial
Brief descriptions of buttons used to
enjoy surround sound
LEVEL button:
Press to light and customize the level
parameters.
SUR button:
Press to light and customize the surround
parameters in the current sound field.
EQ button:
Press to light and customize the equalizer
parameters in the current sound field.
Cursor buttons ( / »: Use to select parameters after pressing the LEVEL, SUR, or EQ buttons. Jog dial: Use to adjust parameters and select sound fields (etc.). SOUND FIELD buttons: A.F.D. button: Press to set the receiver to automatically detect the type of audio signal being MODE button: Press to activate the sound field selection mode. 2CH button: Press to output sound from only the front (left and right) speakers. EQUALIZER button: Turns the equalizer on or off. You can onjo\' surround sound simplv by selecting one of 1 Press MODE. The current sound field is indicated in the display. 2 Turn the jog dial or press the cursor buttons (< or » to select the sound field you want. See the table starting on page 29 for information on To turn the sound field off Press A.F.D. or 2CH (page 24). ? The receiver memorizes the last sound field selected for each program source (Sound Field Link) 9 You can identify Dolby Surround-encoded software by looking at the packaging Use discs with the PR^rrri' logo. In order to enjoy Dolby Digital Note 28
input and perform proper decoding (if necessary).
the pre-programmed sound fields according to the
program vou want to listen to.
each sound field.
Whenever you select a program source, the sound field that was
last applied is automatically applied again. For example, if you
listen to CD with STADIUM as the sound field, change to a
different program source, then return to CD, STADIUM will be
applied again. With the tuner, sound fields are memorized
separately for AM, FM, and all preset stations.
(AC-3) playback you must use discs bearing this logo.
When using sound fields, do not select both speakers (A-»-B) with
the SPEAKERS selector.