Sony STR-DE635 - Manual (Page 15)

Performing Initial Setup Operations
Jnce you have made speaker connections and have
urned on the power for the first time, clear the memorv.
\fter you have done this, set the speaker sizes, speaker
ocations and whate\'er other initial s\'stem settings are
lecessary.
Before turning on the receiver
vfake sure that you have:
* Turned MASTER VOLUME to the leftmost position (0).
* Selected the appropriate front speakers (see ''\l\
SPEAKERS selector" on page 23).
Clearing the receiver's memory
•efore you use your receiver for the first time or when
ou want to clear the receiver's memory, do the following,
his procedure is not necessary if the demonstration
ctivates when you turn the power on.
Performing initial setup operations
Before )'ou use your receiver for the first time, use the SET
UP button to adjust settings to correspond to your system.
You can set the following items. For details on how to
adjust each setting, see the page in parethesis.
• Speaker size and placement (page 16).
• Speaker distance (page 18).
• The video signal paired with the 5.1CH INPUT (page
46).
• Whether other components will turn on and off via the
CONTROL A1 II control system (page 46).
X
0
o
*■
s'
(Q
c
*D
3
a
VI
5
5’
(fi
c
•o
A
VI
*0
№
0)
JT
ft
V)
<
ft
3
Turn off the receiver.
Hold down l/d) for 5 seconds.
The currently selected function, then the
demonstration message appears in the display and the
items including the following are reset or cleared:
• All preset stations are reset or cleared.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program source
and preset stations are cleared.
15