Warning, Before you begin, Connecting to video equipment – Sony CPJ-100 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
English
S video cable (not supplied)
Câble video S (non foumi)
Cable de video S (no suministrado)
bvaeoO
»V«EO«
Ki!:
S VIDEO
our
S VIDEO IN
Signal flow
Sens du signal
Flujo de la señal
I AUDIO IN
A/V connecting cable (supplied)
Câble de raccordement A/V (fourni)
Cable conector de audio/video (suministrado)
Cable conector de audio/video (suministrado)
Beiore operating the unit, please read this
manual thorouglUy and retain it for
future reference.
Owner's Record
The model and serial numbers are located
on the bottom. Record the serial number
in the space provided below. Refer to
these numbers whenever you call upon
your Sony dealer regarding this product.
Model No. CP)-I00
Serial No.______________
WARNING
To prevent fire or shock
hazard, do not expose
the unit to rain or
moisture.
J_l
MSROMLBCmCSMOCK I
OONOTOPtW
CAUTION TO hCOUeCTHCMSKCkCtSCmiC SHOCK.
00
NOT nCMOVf COKIN «on tACK)
NO UKN-SINVICeAati NANTI MSM
NINCN SCRVICINO TO OUAUflCO SCNWICC PCNSOMICL
A\
I
CAUTION
I
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
For the Customers in
Canada
This apparatus complies with the Class E
limits for radio noise emissions set out in
Radio Interference Regulations.
1
CAUTION
I
TO PREVENT ELECTRIC SH(XnC, DO
NOT USE THIS POLARIZED AC PLUG
WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE
EXPOSURE.
Before You Begin
Deciding where you want
to watch the projector
Locate the unit with the lens pointed
toward the projected plane.
For the distance to and size of the
projected plane, refer to the table below.
This symbol is intended to
alert the user to the presence
of uninsulated "dangerous
voltage" within the product's
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert tile user to Die presence
of important operating and
maintenance (servicing)
instruettons in the literature
accompanying the appliance.
For the Customers in the
U.S.A.
WARNING
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the PCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation. This equijsment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful interfer
ence to radio or television reception,
which can be determined by turning the
equipment off and on. the user is
encouraged to try to correct the
interference by one or more of the
following measures;
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
■ Connect the equipment into an outlet
on a circuit different from Dial to which
the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
Distança to
the projected
plana
Siza of the projactad
jilana
3feet(Im)
Approx.
19x 14
>/4
inches
(480 x 360 mm)
6feet(2m)
Approx.
37 7/4x285/8 inches
(960 x 720 mm)
8feet (25m)
Approx.
471
/4
X 35
'/2
inches
(1200 x 900 mm)
Recommended distance to the {projected
plane is Sfeet (2.5m).
Connecting to Video
Equipment
(S
m
illustration Q.)
Connect the unit to a video cassette
recorder, video camera recorder, or other
video equipments with the supplied A/V
connecting cable.
When connecting, turn off the power of
the unit and the video equipment.
Connecting to a video
cassette recorder [a]
Connecting to a video
camera recorder [b]
If your video camera recorder has a
VIDEO/AUDIO IN/OUT selector switch,
set it to OUT.