Sony CPD-9000 - Manual (Page 5)

CONNECTION WITH OTHER MICROCOMPUTERS
Using the appropriate connecting cable and with the
RGB input selector of this display set to the appropriate
position, this display can be used with other conrimer-
cially available microcomputers, character generators
or videotex unHs.
Examples of connections with other microcomputers
Equipment that can be connected Monitor cable (optional) to be used
Position of RGB
Input selector of
CPD-1201/9000
A microcomputer with
digital RGB output
e.g. IBM PC or IBM PC XT,
having a 9-pln digital
RGB output terminal
with positive sync signals
To RGB IN of
CPD-1201/9000
SMF-503
DIGITAL 1
mn
L ____________________ \
mill
mill Ullli o
k-cJ
>-<-A r-r-
— ■ —k*
e.g. IBM PCjr,
having a 18-pin digital
RGB output terminal
with positive sync signals
SMF-505
To RGB IN of
CPD-1201/9000
DIGITAL 1
a
e.g. NEC PC-8001A
having an 8-pin DIN
digital RGB output terminal
with negative sync signals
Use a connecting cable (usually supplied to
the computer) that will match the RGB
output signals from the 8-pin DIN terminal to
the RGB IN signal arrangement of
CPD-1201/9000.
DIGITAL 2
To RGB IN of
CPD-1201/9000
Note
The monitor cable should arrange the RGB output
signals of the connected equipment so that they match
the signal assignment of the RGB IN connector of this
unit (See page 6). If you are not sure whether you can use
your computer, character generator, or videotex unit
with CPD-1201/9000 or which monitor cable to use. con­
sult your authorized Sony dealer.