Sony STR-DA30ES User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

About This Manual
T
able
of
contents
The instructions in this manual are tor model STR-
DA30ES. Check vour model number b)- looking at the
upper right corner ot the front panel.
Conventions
• The instructions in this manual describe the controls on
the receiver. You can also use the controls on the
supplied remote if they have the same or similar nailTos
as those on the receiver. For details on the use of your
remote, refer to the separate operating instructions
supplied with the remote.
• The following icon is used in this manual:
Indicates hints and tips for making the task easier.
This receiver incorporates the Dolby* Pro Logic Surround
system and the DTS**" Digital Surround System.
• Mivuifacfurcti under Ucciii^c from Dolby Luhoratoru’s Licensing
Corporation. DOLBY, the doidde-D
si
/
jn
M
"PRO LOCiIC."
and Dolby Digital
('/\C-.L)
are trademarked of Dolby Laboratonee
iicensini^ Corporation.
**Manufactured under license from DTS, Inc. "DTS". "dii^ital
surround", and "coherent acoustics" are trademarks of DTS. Inc. .4//
rights reserved.
Hooking Up the Components 4
Unpacking 4
Antenna Hookups 5
Audio Component Hookups 6
Video Component Hookups 7
Digital Component Hookups 8
Other Hookups 10
Hooking Up and Setting Up the
Speaker System 12
speaker System Hookup 13
Multi-Channel Surround Setup 14
Before You Use Your Receiver 19
Location of Parts and Basic Amplifier
Operations 22
Front Panel Parts Description 22
Enjoying Surround Sound 26
Selecting a Sound Field 27
Understanding the Multi-Channel Surround
Displays 31
Customizing Sound Fields 33
To view the demonstration
Hold down SET UP and press
1/(1)
to turn on the power.
The following message appears in the display twice:
"Now Demonstration Mode!! If you finish
demonstration, please press POWER KEY while
this message appears in the display. Thank you!!"
To cancel the demonstration
Press
1/(1)
to turn the receiver off during the previous
message. The next time you turn the receiver on, the
demonstration will not appear.
Note
Running the demonstration will clear the receiver's
memory. For details on what will be cleared, see "Clearing
the receiver's memorv” on page 19.
Receiving Broadcasts 37
Direct Tuning 38
Automatic Tuning 39
Preset Tuning 39
Other Operations 41
Indexing Preset Stations and Program Sources 42
Recording 42
Using the Sleep Timer 43
Adjustments Using the SET UP Button 43
Additional Information 44
Troubleshooting 44
Specifications 46
Glossary 48
Tables of Settings Using the CURSOR MODE and
SET UP buttons 49
Index 51