Connecting and installing the tv (continued), Connecting an audio system, Connecting a camcorder – Sony KV-27V22 User Manual
Page 9: Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting and Installing the TV (continued)
Disconnect all power sources before making any connection:
Connecting an audio system
For greater viewing pleasure, integrate your
home stereo into the system.
1
Using AUDIO connectors, connect AUDIO
OUT on your TV to one of the unused Line
inputs (e.g. Tape-2, etc.) on your stereo
(White-AUDIO Left, Red-AUDIO Right).
2
Set your stereo to the chosen Line input
and refer to page 14 of this manual for
additional audio setup instructions.
(Rear of TV)
VHPAJHF
Q voeo
(MC^ 4 (vO J
ALlbtO
1
AUDIO-L (white)
AUDIO-R (red)
RK-74A
(not supplied)
Line
input
r i l l .
Connecting a camcorder
• KV-27V22, 29V22M only
This connection is convenient for viewing a
picture directly from your camcorder.
Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your camcorder
to AUDIO and VIDEO IN on the front panel
of your TV (Yellow-VIDEO, White-AUDIO
Left, Red-AUDIO Right).
Note:
• If you are connecting a monoaural camcorder,
connect only the single audio output to the left
input on your TV.