Sony KV-27V22 - Manual (Page 5)

fM i Connecting and Installing the TV
Connector Types
You may find it necessary to use some of the
following connector types during set up.
Coaxial Cable
Standard TV Cable and Antenna connector
Plug Type
cO
Press onto connection
Screw-on Type
• VHP only
( (lift FMl Screw onto connection
or
• VHF/UHF
S Video Cable or
High quality Video connector for enhanced
picture quality • Cable
{(3 —*■ ©)) Align guides and
B
• VHF only
press onto connection
or
Audio/Video Cable • UHP only
Conventional Audio/Video cable or
• VHF/UHF
Connecting directly to cable or an
antenna
The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see
A); older homes will probably have 300-
ohm twin lead cable (see B); still other homes
may contain both (see C).
75-ohm (Rear of TV)
coaxial cable VHF/UHF
=dH]
Press onto connection
Yellow - Video
White - Audio (Left)
Red - Audio (Right)
Making Connections
For best picture quality, a cable TV system or
outdoor antenna is recommended.
300-ohm twin
lead cable
(Rear of TV)
VHF/UHF
Antenna connector
VHP
75-ohm coaxial cable
R
(Rear of TV)
VHF/UHF
and
UHF
EAC-66 U/V mixer
(not supplied)
Cable or antenna
This is the most simple cormection. Cormectioi
is made directly from the cable or antenna to
the TV.
Cable
(Rear of TV) VHF/UHF
=tTT—
Connecting a cable box
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Cable
(Rear of TV) VHF/UHF
1
r
D D *c
IN
_ Cable box
^ ^ OUT
* Your Sony remote control can be programmed
to operate your cable box (see page 18).
Note:
• If you will be controlling all channel selections
through your cable box, you should consider
using the CHANNEL FIX feature discussed on
page 16.
300-ohm twin lead cable