Connecting the ac power cord, Using the player on batteries, Note – Sony CFM-10 User Manual
Page 4: Choosing power sources, Specifications
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/629367/4/background.png)
Choosing Power Sources
Rear Panel
Connecting the AC power cord.
Open the batterv compartment and take out the
AC power cord. An opening in the compartment
door permits AC operation with the door in its
place. Then, connect the AC power cord to the
wail outlet.
to a wail outlet
Using the player on batteries.
Insert four size D (R20) batteries (not supplied)
into the batterv compartment.
Note
Replace the batteries v\ hen the OPR/ BATT indicate)!' dims or v\ hen the player stops
operating. Replace all the batteries with new ones.
Specifications
' Frequency range 1-M: 87.6-108MH/./A.M: 330-
l,710kH/
> Antennas FM: Telescope ontonna/AM: Buiit-in
territe bar
- Recording system 2-track, mt>no
' Frequency response U)0-8,0(X)Hz
' Speakers ITill-range; 7.7ctn (3V>tinches) dia x 1
' Power output 0.9W (at 10"o harmonic distortion
in
LX.'
operation)
‘ Battery life
FM recording
Semy K20i'’; Approx. 24 ht^urs
Sony I.R20 alkaline : Approx. 55 ht)urs
Playback____________ ________________ _____
Sciny R20P ; Approx. 20 hours
Sony LR20 alkaline : Approx. 50 h • Power requirements 120V AC, 60H//8V LX , four size D (R20) batteries • Power consumption AC5W • Dimensions Approx. 272 x 130 x 121.5 mm(w/h/ d)( lOV-i .V 5'/^ X 4’/ k inches) ind. projcx'ting parts and controls) • Mass .Approx. 1.7kg {31b 12oz}{ ind. batteries) Design and specifications are subject to change
without notice.