To remove the discman, To attach the remote control holder, To route the cord – Sony D-848K User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

2 Attach the mount plate to the console

box with the supplied velcro tapes.

Bottom of
the mount plate

Note on the car battery cord
The 4.5V DC plug supplied with car
battery cord conforms to the proposed
standards of the Electronic Industries
Association of japan (EIAj). Do not connect
it to other Discman.

Polarity of the plug
(EIAJ standards)

To remove the Discman

To attach the remote control
holder

Attach the remote control holder with
the supplied double-sided sticking tape.

To route the cord

Use the supplied spiral tube to route the
cords so that they do not interfere with
your driving.