Sony CDP-C201 - Manual (Page 13)

To erase the last selection programmed
Press ■ once to erase or correct the program.
To erase all the selections programmed
Keep ■ pressed to erase or correct the program.
The program will be erased in the following situations
• ™ is pressed during program play.
• Power is turned off.
To display the total playing time of the program
Press the TIME button after programming and before
playing. The time display will blink and each disc will be
computed for the total programmed time. After the
addition has been completed, the program time will be
displayed for 3 seconds.
When other programs are added, and the TIME button is
pressed, the program time of the added program only will
be computed. On the other hand, if even one step is
cleared, it will compute from the beginning.
If selections numbered 21 or higher is programmed, the
“ — i n d i c a t i o n will appear instead of numbers.
To stop program play
Press ■. The last selection number programmed is
displayed.
To resume play, press ►ll (or ► on the remote
commander). Play begins from the beginning of the
program.
You can play the same program repeatedly as long as
you do not cancel program .play or erase the program.
To cancel program play
Press CONTINUE and return to the continuous playing
mode.
The program will be erased.
13