Sony PCG-505GX User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To connect a projector
You can use a projector as an external display, such as the Sony LCD
Projector.
1
Use the O symbol to locate the Monitor connector. Plug the RGB
signal cable into this connector.
2
Use the 0 symbol to locate the Headphone connector. Plug the audio
cable into this connector.
Connecting Peripheral Devices
^ See the manual that came with your projector for more information on installation and use.
To select a display
When you connect an external display to the monitor connector, you can
press Fn+F7 to toggle the output between the Liquid Crystal Display
(LCD), the external monitor, or both devices. See “Selecting the Display
Mode” on page 78 for more information.