Trail Tech SCMR16 HID LIGHTS FOR 1 1/8 IN. BAR CLAMP: POLARIS OUTLAW 471-PLF - Manual (Page 17)

17
2-1
Continued ...
VEHICLE MOUNT
STEP 1: Locate power wire
behind the vehicle key switch.
Key Switch (+) Wire Colors:
Raptor 660/700:
Yamaha YFZ450:
Suzuki Z400:
Kawasaki KFX700:
DS650:
Honda 400EX:
Polaris Predator:
Honda TRX450:
CONNECT VEHICLE MOUNTED LIGHTS TO
VEHICLE POWER:
2-1: Light Switch
2-2: Ring Terminal
2-3: Connectors - male
2-4: Connectors - female
2-5: Waterproof In-line tap
Brown/White
Brown
Orange
Brown
White
Black/White
Red/Black
Black
Step 2:
Clip the the in-line tap (2-5) onto the power wire behind the key
switch (located in Step 1.) Make sure the wire will be long enough
so that the switch (2-1) can be installed in the desired location.
Step 3:
A) Connect one positive(+) lead from each light to the female
connectors (2-4.)
B) Connect one negative(-) lead from each light to the connectors
(2-3), then connect the ring terminal (2-2) to the negative battery
terminal or to frame ground (under a bolt.)
Some light
kits include a
simple wiring
harness: